The use of silica sand as a raw material in glass production requires good industrial wear protection for the pipelines used to fill the silos and feed the tanks.
The processing and conveying equipment used in recycling old glass also has to be protected.
We also offer economical solutions to protect the production and optimize recycling wear protection processes in the manufacture of glass wool and insulation materials.
GLASS INDUSTRY
OUR PRODUCTS FOR YOUR INDUSTRY
CASE STUDIES
gallery
Literature Downloads
Float glass is a sheet of glass made by floating molten glass on a bed of molten metal, typically tin, although lead and various low melting point alloys were used in the past.
This method gives the sheet uniform thickness and very flat surfaces. Modern windows are made from float glass.
Most float glass is soda-lime glass, but relatively minor quantities of special borosilicate and flat panel display glass are also produced using the float glass process.
Glass container production: Broadly, modern glass container factories are three-part operations: the batch house, the hot end, and the cold end.
The batch house handles the raw materials; the hot end handles the manufacture proper—the forehearth, forming machines, and annealing ovens; and the cold end handles the product-inspection and packaging equipment
We can assist you with the Maintenance of your Belt Conveyors
Whether you are experiencing premature wear of conveyor belts, product spillage or dust generation from an incorrectly sealed load zone, TECHNO CAST has the expertise to find solutions that will keep your operation running at peak productivity.
Efficient Wear Protection for Chutes & Discharge points
With our long experience in Wear Protection Solutions, we can provide you with efficient maintenance solutions to solve your problems with chutes and discharge points. Depending on some parameters, such as grain size, impact energy, temperature, speed, humidity, chutes can be subject to severe wear problems.
TECHNO CAST can help you identify the type of wear and provide the adequate solution. We have a comprehensive line of products and technologies available for each situation. We provide a variety of lining materials for chutes & discharge points subject to wear, abrasion impact .
We can also perform the installation of the adequate lining for to protect your existing chutes and discharge points or can provide you with prefabricated and lined chutes.
We can help you Improve the Flow of Material in your Silos & Hoppers & Transportation Pipes
The silos and hoppers in cement factories constantly undergo variations in parameters such as humidity, temperatures, density, and quality of materials. This results in large material flow variations which often lead to blockage / clogging of the silos and hoppers.
Our wear protection and sliding -promotion solutions installed on silo and hopper on walls and surfaces ensure impeccable operation. They thus avoid the need for manual cleaning or the need to use vibrators or air cannons to ensure continuous production without interruption.
When choosing the right materials for wear protection linings, our engineers take into account the specific geometry involved, for example that of a hopper or silo. Very often, we propose solutions composed of several materials which will be installed in the different parts of a silo (cylindrical, conical part.)
Engineered Spare Parts for your Crushing ,Milling & Cooler Equipment
TECHNO CAST provides custom solutions for the protection of industrial facilities from wear and impact damage. Our wear-resistant foundry parts are engineered to improve productivity and minimize maintenance downtime.
With a holistic approach to wear part design that improves the original part’s weight, weight distribution and alloy selection, our steel industry products include wear parts for horizontal shaft impactors, hammermills, ball mills, feeders, valves, roller mills, gyratory crushers, cone crushers, jaw crushers.
We also specialize in customized and cost-cutting solutions designed for particular wear challenges.
TECHNO CAST offers its customers comprehensive solutions in the field of screening, scalping, washing technologies. With our partner Haver Niagara, we can supply single machines, to turnkey handover of complex plants as well as process engineering solutions.
We can perform audits and inspections on your machines, help you with the selection of the most efficient screening media for your application and provide maintenance services to keep your process at high performance.
TECHNO CAST can perform vibration analysis on the machines to improve its efficiency, we can provide the proper screening media to obtain the highest throughput.
We can also help you set up a proper maintenance procedure for your screening process.
We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you consent to the use of ALL the cookies.
This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
