Chevron Type, Secondary Belt-cleaner
Effective and affordable
Chevron, cleated, and raised-rib belts present a special problem for efficient cleaning. However, not cleaning these belts lets the carryback move along the return belt and cause all the familiar problems: mistracking, buildup, and premature wear on idler rollers, resulting in belt wear and damage.
The Chevron Belt Cleaner effectively cleans cleated, raised-rib, and chevron belts without the clogging and rapid wear associated with conventional brush-type cleaners. Finger length, spacing, and rotary action allows the carryback to fall free instead of clogging. Drum life ranges from 1 to 3 years depending upon the application, conditions, and the material being conveyed.
features and benefits
specifications
part numbers
gallery
Literature Downloads
FEATURES & BENEFITS
- 50 mm long-wearing SBR rubber fingers gently dislodge carryback from chevron or raised ribs
- Compatible with reversing belts and mechanical fasteners
- CEMA Class 3
- Versatile tensioner kit can be mounted to push-up or pull-up the cleaner
- Belt speeds up to 2.5 m/sec
- Belt widths 450 to 2100 mm
IMPROVE CONVEYOR BELT CLEANLINESS
Can be mounted 15 to 20 mm from the point where the belt leaves the head pulley on down the conveyor line
Cleaning efficiency can be increased 50 to 70 percent by adding a second
PRODUCT SPECIFICATIONS
TECHNICAL PROPERTIES
- Maximum Belt Speed: 2.5 M/sec
- Temperature Rating: -35° C to 82° C
- Overall Diameter: 238mm
- Cleaner Material: Rubber 45-A durometer
- CEMA Cleaner Rating: Class 3
- Shaft Length: Belt Width + 750mm
- Shaft Size: 25mm Hex Shaft
- Finger Length: 50mm
- Rubber Finger Ring Width: 75mm
- Maximum Chevron or Cleat Height: 25mm
- Available for Belt Widths: 450 to 2100mm
- Horizontal Clearance Required: 250mm
- Vertical Clearance Required: 250mm
GALLERY
LITTERATURE DOWNLOADS